Chemitec S470 MultiprobeS470 Multi-probe for Ammonium and/or Nitrate

Process ISE Probe to Measure Ammonium, Potassium, Nitrate, Chlorides and Temperature

S470 is a complete family of Ion selective electrodes (ISE) probes suitable for monitoring the performance of the ammonium ion (as NH4+ or NH4–N) and nitrate ion (as NO3– or NO3–N) in a liquid matrix.

AS Bioscope Particular attention has been paid to identify a set of sensors that are stable and also sensitive. For improved accuracy the probe includes a reference electrode with a particularly high performance and a high capacity of compensation of the pollutants. The sensors provide accurate readings of the above analytes in the following applications:
– surface waters
– wastewater
– zootechnical and industrial process water.

The S470 family consists of 3 elements:
S470/NH4+ Sensor for ammonium ion (0÷100ppm) with compensation of the potassium ion (0÷1000ppm)
S470/NO3– Sensor for nitrate ion (0÷100ppm) with compensation of the chloride ion (0÷5000ppm)
S470 Combined Sensor for ammonium (0÷100ppm) and nitrate (0÷100ppm) ions with compensation of the potassium (0÷1000ppm) and chloride (0÷5000ppm) ions



Measuring Range NH4+ 0 to 100 ppm
Measuring Range K+ 0 to 1000 ppm
Measuring Range NO3- 0 to 100 ppm
Measuring Range CL 0 to 5000 ppm
Measuring Range Temperature 0 to 50°C
Measuring method Ion Selective Electrodes
Precision ±1 mg/L or ± 1%
Response 90% of the value in less than 60 seconds
Refresh Time maximum less than 1 second
Operating pH range 4 to 10 pH
Temp. compensation with internal NTC probe
Operating temperature 0 to 50°C
Maximum pressure 1 bar
Body material AISI 316
O-ring NBR
Protection, electrodes housing and superior cap Black PVC
Mechanical protection IP68 Sensor+cable
Power supply 12 ÷ 24Vdc
Cable 10m submersible
Signal interface Modbus RTU Standard Protocol